
Digital impressions use a handheld intraoral scanner to capture a high-resolution, three-dimensional view of the teeth and surrounding soft tissues. Instead of mixing impression material and waiting for it to set, the scanner records a series of calibrated images that the software stitches together into a continuous digital model. That model can be rotated, measured, and analyzed on-screen immediately, giving clinicians a detailed and accurate representation of a patient’s oral anatomy.
The scanning process relies on optical and light-based technologies combined with advanced algorithms that correct for small movements and stitch overlapping frames. This reduces common sources of error found in traditional impressions, such as voids, distortions from tray removal, or material shrinkage. The resulting file is compatible with CAD/CAM systems and most dental laboratories, which means the same digital dataset can be used for design, fabrication, and quality checks.
Because the output is a digital file rather than a physical cast, it can be archived indefinitely without deterioration. Clinicians can refer back to earlier scans to monitor changes over time or to verify fitting plans for complex restorations. That digital continuity supports more predictable care and enables clearer communication among the clinical team, the laboratory, and the patient.
At Maryville Family Dentistry, we integrate these digital models into treatment planning so the team has a reliable foundation for restorations, aligner therapy, and prosthetic design.
One of the most noticeable benefits of digital impressions is the patient experience. Many people find conventional putty impressions uncomfortable or anxiety-inducing, especially children and patients with strong gag reflexes. Scanning replaces bulky trays and pastes with a quick, noninvasive wand that moves around the mouth while the patient breathes normally.
The speed of the procedure also improves comfort. A complete scan of a single arch typically takes just a few minutes, and clinicians can review results on the monitor in real time. If an area needs rescanning, it can be corrected immediately rather than having to remake an entire impression. This reduces the need for repeat visits and saves patients time in the chair.
Digital files are transferred electronically, so there’s no physical impression to be handled, stored, or shipped. That translates into fewer steps in the process and less chance of damage or contamination, contributing to a smoother, more hygienic visit for patients and simpler logistics for the practice.
Because the method is gentle and efficient, it’s particularly well suited to families and pediatric care, reinforcing Maryville Family Dentistry’s focus on comfortable, modern dentistry for patients of all ages.
Accuracy is a primary reason dentists adopt digital scanning. The level of detail captured allows for fine margin definition, precise interproximal contours, and accurate occlusal relationships. For fixed restorations such as crowns and bridges, that translates to better-fitting final restorations and fewer adjustments at cementation.
Digital systems also provide objective metrics that aid clinical decision-making. Clinicians can measure distances and angles directly on the scan, assess margin integrity, and simulate restorative outcomes before fabrication begins. These capabilities reduce guesswork, support conservative tooth preparation, and help ensure the restoration aligns with the intended treatment plan.
When combined with advanced imaging—such as cone beam computed tomography (CBCT) or intraoral photography—digital impressions become part of a comprehensive digital workflow. This integrated approach enhances diagnostic clarity and allows clinicians to cross-reference data, improving the predictability of complex procedures like implant placement and full-arch rehabilitation.
Ultimately, the precision of digital impressions supports efficient chairside work and streamlines communication with dental laboratories, which can translate into smoother clinical appointments and more consistent restorative outcomes.
Because scans produce standardized digital files, they can be transmitted instantly to an in-house milling unit or to a remote laboratory. Electronic transfer eliminates courier time and the risk of impressions being distorted during shipping. For many types of restorations, laboratories can begin design and fabrication sooner, shortening turnaround without sacrificing quality.
Digital impressions are a cornerstone of same-day restorative systems. When combined with CAD/CAM milling or in-office ceramic milling units, digital scans allow for the design and manufacture of custom crowns, onlays, and veneers in a single visit. The clinical team can control design parameters, check fit virtually, and deliver a finished restoration while the patient waits—avoiding temporary restorations and additional appointments.
For work sent to external labs, the digital workflow supports clearer instructions and easier collaboration. Technicians can mark areas of concern, propose design alternatives, and return virtual mockups for clinician approval before fabricating the final piece. That collaborative exchange reduces remakes and helps ensure the final restoration meets both clinical and esthetic expectations.
No special preparation is required for most digital impression appointments. Patients should follow normal oral hygiene routines so the scanner can capture clear images of tooth surfaces and margins. During the appointment, the hygienist or dentist will guide the scanner around the arches while the patient rests their head and opens naturally; the process is typically calm and well tolerated.
After the scan, the clinician reviews the virtual model with the patient on-screen, explaining areas of interest and proposed next steps. Because the model is interactive, clinicians can highlight margins, show occlusal contacts, and demonstrate how a proposed restoration will align with the adjacent teeth. This visual dialogue helps patients understand treatment options and expected outcomes.
Once the clinical team approves the scan, the digital file can be used to design restorations, fabricate appliances, or plan surgical procedures. If the care plan involves a same-day restoration, the workflow moves directly to design and milling. If laboratory work is required, the file is transmitted electronically and the team follows an agreed timeline for fabrication and delivery.
Digital impressions represent a modern, patient-centered approach to capturing an accurate, long-lasting record of oral anatomy. They improve comfort, enhance precision, reduce turnaround time, and integrate smoothly with contemporary restorative and orthodontic workflows. If you’d like to learn more about how digital impression technology is used in our practice, contact us for more information.
Digital impressions use a small handheld scanner to capture a precise 3D image of your teeth and gums, replacing the thick, messy putty trays used for traditional impressions. Maryville Family Dentistry uses this technology to create highly accurate digital models for crowns, aligners, and other restorations.
Digital scanning is faster, more comfortable, and eliminates the gagging or mess that often comes with traditional impression material. The resulting models are also more precise, which can mean a better-fitting final restoration and fewer remakes.
Your dentist or hygienist gently glides a small wand over your teeth to capture images, which are instantly assembled into a 3D model on a computer screen. Most scans take just a few minutes and require no biting or holding still with a tray in your mouth.
Yes, most patients find digital scanning far more comfortable than traditional impressions since there's no bulky tray or thick material to sit in your mouth while it sets.
Digital scans are used to design crowns, bridges, veneers, and dentures with precise, custom-fitted results. Because the models are digital, they can be sent electronically to a lab or used directly with in-office milling technology like CEREC.
Yes, digital impressions are the standard way to plan clear aligner treatment, including CandidPro and Invisalign. The scan is used to map out each stage of tooth movement before your custom aligners are made.
Digital scanning is generally more accurate than traditional putty impressions, which can distort slightly as they set or during shipping. A cleaner, more precise digital model helps ensure restorations fit correctly the first time.
A full scan of your upper and lower teeth typically takes just a few minutes, much faster than waiting for traditional impression material to set.
Yes, digital scanning is often easier for children than traditional impressions since there's no uncomfortable tray or material that can trigger a gag reflex.
Often, yes. Because digital files can be sent electronically and reviewed instantly, Maryville Family Dentistry can move more quickly from scanning to designing your restoration or aligners, cutting down on turnaround time.
Email: